! To be entered onto IOS XE Device

! ***** Step 1 *********
! Enable IOX
conf t
iox
exit

! Verify IOX
sh iox-service

! ***** Step 2 *********
! Create and Configure Virtual Port Group
conf t

interface VirtualPortGroup 0
  ip add 192.168.35.1 255.255.255.0
  no shut
  exit

! ***** Step 3 *********
! Configure NAT
conf t

interface VirtualPortGroup0
  ip nat inside
  exit

! Interface connected to local network
interface GigabitEthernet1
  ip nat outside
  exit

ip access-list standard NAT_ACL
  permit 192.168.0.0 0.0.255.255
  exit

ip nat inside source list NAT_ACL \*  interface GigabitEthernet1 overload

! ***** Step 4 *********
! Enable Guest Shell
! Entered from Enable Mode (not config)
! All entered on single line
guestshell enable VirtualPortGroup 0 guest-ip 192.168.35.2name-server 208.67.222.222

! Verify Guest Shell Running
show app-hosting list

! ***** Step 5 *********
! Install git within Guest Shell and Clone Code
guestshell run sudo yum install git
guestshell run git clone https://github.com/CiscoDevNet/netprog_basics /flash/netprog_basics